Wednesday 2 December 2009

Branching out

I've had an idea (oh no, you groan, another one!), for which I need wire. Now, I know my way around precious metal wire. but this is more the other kind - copper (which I kind of 'get', courtesy of silversmithing classes), or possibly aluminium (because it's silver and thus a cheat on sterling - it'll all make sense). And I need it thick - 2.5mm minimum. Now, I have questions:

- Does aluminium wire follow the same rules as other metals, i.e. can you work-harden it with a hammer?
- Where can you buy short length of thick wire, to have a play (avoiding major outlay, in case this is a dead duck?)

....and where, oh where did I put the magic machine that creates extra hours each day?

6 comments:

  1. Das mit dem Härten müsste funktionieren wie bei jedem Metall. Ich versuche aber, das herauszufinden...

    ReplyDelete
  2. Hm, vielleicht auch nicht:

    "....Stahl und Aluminium unterscheiden sich wesentlich bei der Härtung.
    Manche Aluminiumlegieren werden geradezu butterweich, wenn man sie erwärmt, und dann im Wasser abschreckt.
    Überhaupt kann man Aluminium nicht so härten wie Stahl.
    Durch die Umformung alleine wird es höchstens fester, es sei denn eine maximale Grenze wird überschritten. Dann bricht es, wird aber trotzdem nicht weich.
    Ursache ist also die Temperatur.
    Die verschiedenen Alu-Legierungen sind härtbar oder auch nicht, und das evtl. notwendige Regime ist verschieden.
    Manche Legierungen härten erst nach Wochen der sogenannten "Auslagerung"."
    http://www.wer-weiss-was.de/theme50/article4969119.html

    ReplyDelete
  3. Ach so, zum Kaufen, gibt es bei Euch Werkstatt-Zubehör-Läden? Also mit Alu wohl nicht, aber mit Kupfer kann man ja löten, die könnten so was haben. Müssten sie eigentlich.

    ReplyDelete
  4. Ich schon wieder *lol*
    Also, Amazon (Aludraht), Bonsai-Läden (da zum Beispiel 4 oder 5 mm Dicke)
    Oder hier: http://www.hg-design.de/zubehoer/draht-1.htm

    ReplyDelete
  5. I don't know about the properties of aluminium... but will be most interested to hear how it shapes up!
    Try seller UKFAB12 on ebay. They've got loads of different sizes of aluminium and it's pretty cheap.
    Lesley

    ReplyDelete
  6. Thank you both :o) I ordered myself a couple of bits and bobs......hmmmmm.....I'll post results if they're post-worthy!

    ReplyDelete